Fitting National Hive Metal Rails for Top and Bottom Bee Space

admin — Sat, 10 Apr 2010 19:56:04 +0000

Hi. Answering a few queries I’ve had about fitting metalwork to National Hive Brood Boxes and Supers here’s a quick and simple guide to correctly fitting metal rails to the woodwork. The image is more or less self explanatory but the essence of the procedure is to turn the brood/super upside down and place some sized bits of timber (10mm for bottom bee space and 18mm for top bee space) under the metal runner to give the correct gap. The metal runner just rests on top of the wooden spacers while you pin it into place. Once done you are guaranteed the correct chosen bee space.

Bee Space Spacers

Time to squeeze in an allotment update…

Spring is finally here in the Peak District so here’s a photo (panorama of four photos stitched together) of where I’m currently up to.

Lots of red onions because my partner Adriana is from Peru and they’re used widely in Peruvian cooking. A new area for soft fruit (Blackcurrants, more Rhubarb, Autumn and Summer Raspberries, Redcurrants, various varieties of Gooseberries and more…) replacing a nettle patch that discouraged the family from venturing down to do some weeding/fettling.

Prior to this year the plot had been one area with treaded down paths every 4 feet or so and nettles all round. I was given some weatherproof boards back end of last year and slowly started making up the raised beds in the picture.

On the far right there’s one high raised bed which will be followed by three more of which two will be given to the kids to grow what they will and two will be used for root veg or spuds.

Amor Mio!

The panorama is perhaps a future bees eye view as I’ve taken the photos from where I’m planning on putting my two Apis Mellifera Mellifera colonies that I have coming in a few weeks.

Top and Bottom bee space National Hive

admin — Mon, 01 Mar 2010 18:45:05 +0000

I’ve had quite a few requests to produce top bee space national hives. Got an order finished this morning so just before my lunchbreak I decided to ‘jig up’ for offering top bee space nationals. Basically the difference in machining requires the production of a deeper top rail for supers and brood boxes and a suitable mortice in the brood/super sides to accommodate the deeper rails. Anyway to cut a not very long story shorter here’s a couple of pics showing the standard British National Hive option of bottom bee space and the new optional top bee space…

Bottom Bee Space National Hive

Top Bee Space National Hive

I’ve also put together a little page on the debate between top and bottom bee space…here

I’ll update the site to allow choosing top bee space as an option later tonight.

peak-hives.co.uk » bee space

Fitting National Hive Metal Rails for Top and Bottom Bee Space

Top and Bottom bee space National Hive